*3ft Ships In 1-2 Months, 2ft / 4ft / 5ft In Stock*

 

To add on additional Extensions, RGB+W Pods, Strips, Dome Lights, Wheel Rings, RZR Fang, X3 Accent lights or any other RGB+W compatible plug and play item to your kit click here.

 

We have just launched our double cased flex wrap whips.  Most companies wrap a string of LEDs around a tube, put shrink wrap on it and run the wire up the outside of the whip covered with a black heat shrink.  We wrap our high density LED strand which uses twice the LEDS of the competitors and leaves no gap between wraps giving you the most LEDS availble.  We then encase it in heat shrink then double encase it in a heavy duty flexible tube which is sealed with resin at both ends, this fully seals the LED strand and heat shrink, protects the leds from impact and allows the wire to be ran into the side of the base and up through the center fully protecting it and leds from elements and impact.  This creates a super heavy duty whip but still allows it to flex and eliminates the most common failures in other brands (impact, dirt/mosture, excessive movement).  Our whips also use screw style waterproof connections that stay clean and connected.  

 

Our whips are manufactured with high quality bases that include spring bases with quick disconnects. Our bases include an industry first Viton pressure seal between the base and the whip to ensure the connection stays clean and limits movement and wear over time.

 

Did we mention we also have the best whip warranty on the market? 25 yr if you can break it we replace it warranty (includes accidental damage).

 

Our all new RGB+W flex wrapped whips are fully plug and play with our RGB+W rock light kits.  Makes installation a breeze and allows you to plug these directly into your current rock light system or add on a dedicated controller and control separately or together.  *Rock light kit not included & you must order dedicated controller if your not currently running our rock light system*

 

Our all new RGB+W Bluetooth & RF Controller allows dual control from a bluetooth app or a back up handheld remote.  Controller also includes brake override option which will turn the kit on and to red if it is wired to your positive brake wire.  

 

We offer two options in the RGB+W Whips:

 

Add to RGB+W 5 Pin Rock Light System: No Controller

This option allows you to plug in your whips directly into our RGB+W rock light kit and run them together.  The whips cannot be controlled independently.  Comes with needed wiring to plug into your current RGB+W 5 pin system.  If you want to turn off independently you can add a in line switch at the link here.  Click Here For In Line Switch

 

Include Dedicated Controller: w/ Option to link to rock light controller.

This option allows you to run by itself if your not running our rock light system or if you want to control your whips and rock lights independently.   

*If you are not running our color change rock lights you will need to choose this option.*

*To run a dedicated controller & sync to your current one you must be running the controller that uses the app LED BLE*

 


*Whip length is measured from the top of the whip to the bottom of the mount*

(RGB+W) Whips - Runs Off Rock Light Controller

$130.00Price
SIZE:
QTY:
WIRING TYPE/CONTROLLER:
    • 25YR WARRANTY (INCLUDES ACCIDENTAL)
    • QUICK RELEASE BASE
    • W/ VITON PRESSURE BUSHING SEALS E ELIMINATE SLACK, WEAR & DUST
    • LED HELIX WRAP INSIDE HEAVY DUTY POLYCARBONATE SEALED FLEX TUBE
    • SEALED TUBE PROTECTS FROM IMPACT & STRENGTHENS TUBE BASE
    • NO CONNECTION THROUGH THE BASE TO WEAR OUT 
    • OVERSIZED SOLID CORE THREADED BOLT & BASE
    • PLUG AND PLAY WIRING EASILY ADD ON
    • WATERPROOF & WATERTIGHT CONNECTIONS
    • INTERNALLY SEALED WATERPROOF CONTROLLER
  • Requires phone to use BT control via LED BLE app.  Also includes extra RF remote, remote does not require line of sight it is paired with the controller. 

    BLUETOOTH APP CONNECTION: Download app “LED BLE” in the app store with the icon below and open the app.

    • DO NOT connect to the device in your phone settings menu 
    • Inside the app in the top left of the screen touch the connection menu (three horizontal lines at top left).  Your controller should show up under that menu. Click to connect if it doesn’t automatically connect.
    • Once connected you can adjust/create colors and patterns as well as turn on and off, the controller should retain the last used setting when powered off then back on.
    • If the app will not connect but the remote works delete the app, pull fuse for 1 minute then re install the app.

    RF HANDHELD REMOTE PAIR: To pair the remote if connection lost, remote should come paired when received:

    • Hold green power button.
    • Remove fuse from controller for 5 seconds, place back in.
    • Continue to hold green power button for 3 seconds
    • If pairing is successful lights should blink 3 times.

    Lock RF Remote to controller:  Pull fuse, insert then with in 3 second press the up brightness and then down brightness button.

    BRAKE OVER RIDE: Connect blue wire to brake power wire, this will come on even if the lights are turned off, we suggest placing on its own switch to only activate when you want it to.

    *Additional instuctions can be found in the product images under this item*

INFINITE OFFROAD (Murfreesboro, TN) 

     Email: infiniteoffroad@gmail.com               Text: (817) 881-2168