.png)
FREQUENTLY ASKED QUESTIONS
Infinite Offroad created the first RGBW rock light on the market in 2016. We coined the term RGB+W to set us apart which has now be come a common term. RGBW means that there are 4 separate diodes in the LED (Red, Green, Blue and a dedicated White Emitter).
We are open M-F (10:00 AM Central to 5:00 PM Central). You can always reach out via text, messenger (FB & IG) or email outside of those hours and we will often reply if we are available.
Orders placed by 3pm Central normally ship same day, there may be days during peak season or high volume days where an order placed before cut off goes out the next business day. Overnight & 2nd day air orders will also normally take priority. If you need to ensure your order ships that day make sure to reach out via phone.
Yes we have a storefront which you can pick up orders and see products in person, Open during normal business hours above.
Yes we have the best warrranty on the market. 25yr you break it we replace it UN-Voidable warranty at ZERO cost to the customer. No fine print, no exclusions and not a "Limited Lifetime Warranty" like most companies which have a ton of exclusions. If your product fails or breaks for any reason we will replace it, even including accidental damage and stupidity!
RGB+W LED lights are a full color change light. It can make any color you choose and you can custom create colors but also has a dedicated pure white diode vs other companies which mix (Red / Green / Blue) to make the color white creating a rainbow color. This is a 5 pin wiring system and requires a controller to change colors and power it.
Single color rock lights, wheel rings, etc.. means that it will only illuminte the color you choose when you order (White for example), this is a 2 pin wiring system (Positive & Ground).
Absolutely, we offer the most customizable kits on the market, we offer more types of lights as well as wiring options than anyone else out there. You can add on to your kit anytime with any of our products that are compatible with your system.
Yes for RGB+W kits it requires a controller to change colors. The lights will plug into the controller, then the app or the hand held remote is used to change colors. For single color products a controller is not required but is suggested as it makes the kit plug and play.
Yes, we offer the most customizable system with well over 40 RGBW accessories, as long as the plug type is the same it will work. The only thing to consider is controller capacity, if your not sure if your controller has enough power capacity to handle the additional lights, reach out to us and we can let you know if you need to upgrade to a higher amperage controller.
No, single color is 2 pin wiring plugs, RGB+W is 5 pin and they are not compatible. You can power both conrollers via the same switch for examle but control via the app/remote would be independent.
We suggest the first 4 to be mounted directly above each tire, the next 4 to go under the belly of the vehicle. When adding more than 8 you can do 2 per fender well and under the center and front/rear of the vehicle.
We usually recommend to start with 8 at least if its in your budget, its one of our most common kits, but that is really up to you. You can always add more at any time but but 8 is a good starting point. IF your looking for more coverage and less shadows a 12pc or 16pc is great as well!
Rock lights are plug and play, the kit will normally come with enough wiring for most installs, we also offer a large amount of different types of extensions and splitters if your looking for something more custom. The systems are fully modular allowing placement of a splitter in the rear, middle and front of the vehicle for easy of wiring. Other companies require you to run a wire back to the contoller for each rock light creating large amounts of excess wire and extra work.
Our rock lights include stainless steel bolts. For any of our flat back rock lights you can use 3m VHB tape as well as self tapping screws. We also offer many mounts (angle, 3d printed, zip tie mounts, and more) on our website.
Yes we offer a few options. Our Max pod case (24w) has recessed locations in the back to mount available magnets we have on our site, due to the size this only works on flat surfaces. Our 6w Lux Mag Pod has a built in magnet and works great on steel flat OR tube surfaces. We offer offer some magnetic mounts like our 45 Degree Magnetic Mount
No they do not, we do offer them on the site but many customers already have mounts or are mounting to an alternate location.
Unless specifically noted (Like in our RZR Pro Kits which include a Pulse Bar wiring harness) our kits generally do not include a wiring harness unless there is an option at check out which asks if you want a wiring harness, like our light bar kits for example. Otherwise your welcome to add one to your order we do offer them on our site but find most customers connect the controller to keyed power or to the battery directly then turn on and off with the remote/app.