** LARGE 8w SHIPS IN 2-3 WEEKS, MAGNETIC 6w IN STOCK **
To add on additional Extensions, RGB+W Pods, Strips, Dome Lights, Whips, RZR Fang, X3 Accent lights or any other RGB+W compatible plug and play item to your kit click here.
ATV/4-Wheeler kit includes the below:
1 x Base RGB+W rock light kit with plug and play wiring & controller with short leads to reduce wire.
2 x 12" RGB+W heavy duty strip for your grille.
The brightest, toughest and best value rock light kit on the market is also the industires first RGB+W rock light with a dedicated pure white emitter. Our products are also covered by the best warranty in the business, a 25 yr if you can break it we replace it warranty (includes accidental damage).
Our Shadow Reaper kit is available in Small 4-watt, Large 8-watt and all new Magnetic 6-watt pods. These integrate high output 4 color RGB+W emitters under an optical blending and magnification lens producing the brightest output, richest colors and widest pattern of any rock light on the market. Most competitors do not have a dedicated white emitter and only 1 LED per color or the colors are seperated. This makes a rainbow effect when producing white and other colors. Don't be fooled by other kits requiring 4-6 times more lights to match the output of our 4-piece kit.
Our plug and play kit includes an RGB+W Bluetooth & RF Controller which allows dual conrol via app or hand held remote and saves hours of splicing wires. Controller also includes brake override option which will turn the kit on and to red if it is wired to your positive brake wire. Our large and small pods have an unbreakable machined ultra slim case with polycarbonate lens and our magnetic version has a clear ultra trough resin both will stand up to anything you can throw at it. Side wire design eliminates the need for adapter pucks required by others and allows for a very low profile flush mount, it also allows use of 3m heavy duty or 3m VHB double sided tape (not provided) to mount and avoid drilling holes (Cannot be used on magnetic mount pods).
Click to add plug/play synced RGB+W whips to your kit.
Click to add RGB+W dome light w/ built in switch to your kit.
Click to add heavy duty 1ft, 2ft, 3ft, 4ft or 5ft RGB+W strips to your kit.
-25YR WARRANTY (COVERS ANY ISSUE EVEN ACCIDENTAL DAMAGE)
-BLUETOOTH APP w/ BACK UP RF REMOTE (NO LINE OF SIGHT REQ)
-2X BRIGHTER & WIDER PATTERN vs COMPETITORS!
-4 / 6 / 8 WATTS PER POD vs COMPETITORS 1-3 WATTS PER POD
-12/16/24 EMITTERS PER POD (3/6 per color) vs COMPETITORS 3 PER POD
-IP68 WATERPROOF LIGHTS vs COMPETITORS IP65 / UNSEALED
-ULTRA THIN SIDE WIRE DESIGN vs BACK MOUNT & ADAPTER PUCK
-FULLY MODULAR ADD ON COMPONENTS vs COMPETITORS SET KITS
-INTERNALLY SEALED CONTROLLER vs COMPETITORS UNSEALED
-WATERTIGHT SCREW CONNECTORS vs COMPEITORS SNAP PIN
-PLUG & PLAY HD STRIPS ADD ON RGBW STRIPS TO YOUR KIT
-12FT LEAD ON EACH POD (PODS WITH NO LEAD w/ 5FT EXT AVAILABLE)
(ATV/4-Wheeler) - RGB+W Rock Light Kit (8w)
Requires phone to use BT control via LED BLE app. Also includes extra RF remote, remote does not require line of sight it is paired with the controller.
BLUETOOTH APP CONNECTION: Download app “LED BLE” in the app store with the icon below and open the app.
- DO NOT connect to the device in your phone settings menu
- Inside the app in the top left of the screen touch the connection menu (three horizontal lines at top left). Your controller should show up under that menu. Click to connect if it doesn’t automatically connect.
- Once connected you can adjust/create colors and patterns as well as turn on and off, the controller should retain the last used setting when powered off then back on.
- If the app will not connect but the remote works delete the app, pull fuse for 1 minute then re install the app.
RF HANDHELD REMOTE PAIR: To pair the remote if connection lost, remote should come paired when received:
- Hold green power button.
- Remove fuse from controller for 5 seconds, place back in.
- Continue to hold green power button for 3 seconds
- If pairing is successful lights should blink 3 times.
Lock RF Remote to controller: Pull fuse, insert then with in 3 second press the up brightness and then down brightness button.
BRAKE OVER RIDE: Connect blue wire to brake power wire, this will come on even if the lights are turned off, we suggest placing on its own switch to only activate when you want it to.
*Additional instuctions can be found in the product images under this item*